T-Guard
- Available in January '09
The
new T-Guard™ helium leak detector: Smallest Leak Detector on
the market and 100 times more sensitive
than conventional testing.
Ideal for RAC component
leak testing, the new T-Guard™ helium
leak detector closes the gap between
pressure decay systems and the more costly
vacuum chamber systems. Already successfully
tested by several integrators in Europe,
America and Asia, T-Guard™ gives faster results and is approximately
100 times more sensitive than pressure
decay and water bath leak testing. The
measurement you get is independent of
temperature and humidity.
Smallest and
smartest leak tester - T-Guard™ does
helium chamber leak detection at atmospheric
pressure. Its Wise Technology™ sensor
enables leak rate measurements of 10-1
to 10-6 mbar l/s and eliminates the need
for a costly vacuum tight chamber or big and costly vacuum pumps.
T-Guard™ technical
data:
Smallest detectable leak rate |
1
x 10-6 mbar l/s (1 x 10-7 Pa m³/s) |
Measurement range |
5 decades |
Response time of the sensor |
450 ms |
Total response time |
< 1
s |
Leak rate units |
mbar
l/s, Torr l/s, Pa m³/s, ppm |
Run up time |
< 3
min |
Dimensions (LxWxH) |
256 x 130 x 272 mm (10" x 5" x 11") |
Weight |
4.5 kg (10 lbs) |
Gas flow |
180 sccm |
Permissible ambient temperature |
+10 °C … +50 °C (50 °F … 122 °F) |
Operating voltage |
24 V |
For more information
on the new T-Guard, contact:
+49 (0) 221/347-42413
jochen.puchalla@inficon.com
|