T-Guard - Available in January '09
The
new T-Guard™ helium leak detector: Smallest Leak Detector on the
market and 100 times more sensitive than conventional testing.
Ideal for RAC component
leak testing, the new T-Guard™ helium leak detector closes the
gap between pressure decay systems and the more costly vacuum chamber
systems. Already successfully tested by several integrators in Europe,
America and Asia, T-Guard™ gives faster results and is approximately
100 times more sensitive than pressure decay and water bath leak testing.
The measurement you get is independent of temperature and humidity.
Smallest and smartest
leak tester - T-Guard™ does helium
chamber leak detection at atmospheric pressure. Its Wise Technology™ sensor
enables leak rate measurements of 10-1 to 10-6 mbar
l/s and eliminates the need for a costly vacuum tight chamber or big
and costly vacuum pumps.
T-Guard™ technical
data:
Smallest
detectable leak rate |
1
x 10-6 mbar l/s (1 x 10-7 Pa m³/s) |
Measurement
range |
5
decades |
Response
time of the sensor |
450
ms |
Total
response time |
< 1
s |
Leak
rate units |
mbar
l/s, Torr l/s, Pa m³/s, ppm |
Run
up time |
< 3
min |
Dimensions
(LxWxH) |
256
x 130 x 272 mm (10" x 5" x 11") |
Weight |
4.5
kg (10 lbs) |
Gas
flow |
180
sccm |
Permissible
ambient temperature |
+10 °C … +50 °C
(50 °F … 122 °F) |
Operating
voltage |
24
V |
For more
information on the new T-Guard, contact:
+49 (0) 221/347-42413
jochen.puchalla@inficon.com
|